Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rocker Cover on the Peugeot 208 1.6 BlueHDi

Model: Peugeot 208 A9, MK 1 - Years 2012-2019

In this guide, learn how to perform a full service on the Peugeot 208; however, in addition to changing the engine oil, you will also replace the rocker cover gasket. To replace the gasket, open the bonnet and disconnect the turbocharger hose; then unscrew the intake duct from the air filter box, removing it as well, as illustrated in the video. Next, unscrew the bolts from the cylinder head cover, disconnecting the various electrical connectors; remove and replace the gasket with a new one, ensuring that the base of the cover and the cylinder head are perfectly clean.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi
Guide to replacing the clutch of the Peugeot 208 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) Below we will see the instructions that will allow us to disassemble and replace the clutch kit of the Peugeot 208 1.6 BlueHDi. First, we open the ho…
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
How to Top Up AdBlue Fluid on Peugeot 208 - Citroen C3 1.6 BlueHDi
Peugeot 208 (2012-2019 / A9, MK 1) In today's video, you will learn how to top up AdBlue fluid, which is used to reduce CO2 emissions, on a Peugeot 208 1.6 BlueHDi Euro 6, as well as o…
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the battery in a Peugeot 208 1.4 BlueHDI, open the bonnet to access the engine bay, as the battery will be located on the right side of th…

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - Where is the Pugeot 208 horn located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos