Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the instrument panel on the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Instrument cluster

You can replace the instrument panel on the Peugeot 206 by using a tool like a screwdriver to pry off the trim panel around the instrument cluster. Once this panel is removed, you will be able to locate the screws underneath that secure the panel in its housing. Remove these screws to extract the device from its place and disconnect the connectors at the back. At this point, you can connect the new panel and secure it with the screws that will then be covered by the trim.

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
How do you replace the instrument panel of the Peugeot 206?
How do you replace the instrument panel of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the instrument panel of the Peugeot 206, you need to pry with an object in order to completely detach the trim panel around the panel: onc…
Replacing the Instrument Cluster Bulbs of the Peugeot 206
Replacing the Instrument Cluster Bulbs of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, in this video tutorial, you will see how to remove and replace the instrument cluster bulbs of the Peugeot 206 in simple and quick steps. Firs…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos