Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Puncture Repair Kit in a Peugeot Partner Electric

Model: Peugeot Partner Tepee MK 3 - Years 2018-2026
Part: Accessory kit

Finding the puncture repair kit in a Peugeot Partner electric can be tricky. The most common location (in newer models) is under the driver's seat, but it’s not enough to just look; slide the seat as far forward as possible, lower the backrest of the vehicle, and reach under the seat cushion. You will discover a rather deep cavity. The kit is inside, in a black bag secured to the mat with Velcro. Being black on black, it is practically invisible at first glance. Another location is under the front passenger seat (same procedure); in the space under the rear seats (especially if there are three seats), but in newer models, this space may be too tight. Some models may have it in the side compartments of the loading area or under the load floor (if liftable).

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Battery Located in the Peugeot Partner?
Where is the Battery Located in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In this video, we can see where the battery is located in the Peugeot Partner and how to proceed if we need to replace it, a very simple operation. A…
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter of our Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To reach it, you will need to bend down …
Where is the heating resistor located in the Peugeot Partner van?
Where is the heating resistor located in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this video, you can see where the heating resistor is located in the Peugeot Partner van and how to proceed if you need to replace it, a very simp…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos