Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the headlight bulb on a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight bulb
Operation: How to replace the headlight bulb on a Peugeot 207

Before we can begin, we will have to open the front hood, so as to obtain the necessary space to be able to work. In the lower right corner of the engine compartment we can see the headlight housing. Let's start by disconnecting the power plug of the headlight, so as to be able to reach the rear cover of the bulbs more comfortably. So let's continue with removing the cover of the bulbs, simply disengaging it. Once we have removed the cover, we will have reached the burned out bulb. We then continue with the disconnection of the plug connected to it, and then release the clip that fixes the burned out light bulb. When we have completed this step, we will be able to remove the bulb, and we will have finished the disassembly. To mount the new bulb and close everything again we will simply have to follow these steps in reverse, and we will have completed the replacement.


Posted on 31 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does the Peugeot 207 low beam cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos