Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seat on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Seat

In this video tutorial, we will see how to remove the driver's front seat from a second-generation Peugeot 308. First, open the front door and obtain a socket spanner with an extension to unscrew the fastening bolts found on the seat tracks; once the front and rear bolts are removed, lift the seat to disconnect the electrical connector for the seatbelt sensor by opening the tab, as shown in the video. Now you can remove the seat; apply the reverse procedure for reassembly!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front seat of the Peugeot 308
How to disassemble the front seat of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The instructions in this guide will show us how to disassemble and eventually repair or replace the front seat of the Peugeot 308. First, we open the…
How to disassemble the front seat of the Peugeot 308
How to disassemble the front seat of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) If you want to disassemble one of the two front seats in your first edition Peugeot 308 by yourself, you just need to follow the steps described in t…
How to Remove the Front Seat from the Peugeot 308 SW
How to Remove the Front Seat from the Peugeot 308 SW
Peugeot 308 (2007-2014 / T7, MK 1) In this guide, we will discover the main steps on how to remove and replace the front seat of the Peugeot 308 in station wagon version. First, open t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos