Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat from the Peugeot 308 SW

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

In this guide, we will discover the main steps on how to remove and replace the front seat of the Peugeot 308 in station wagon version. First, open the front door and start by unscrewing all the screws found on the seat rails; to do this, use a Torx screwdriver, moving the seat back and forth to access them, as shown in the video.

At this point, disconnect the electrical connector located under the seat by pressing the tab; now you can finally remove the seat from the vehicle and then reassemble everything!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to disassemble the front seat of the Peugeot 308
How to disassemble the front seat of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The instructions in this guide will show us how to disassemble and eventually repair or replace the front seat of the Peugeot 308. First, we open the…
How to disassemble the front seat of the Peugeot 308
How to disassemble the front seat of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) If you want to disassemble one of the two front seats in your first edition Peugeot 308 by yourself, you just need to follow the steps described in t…
Removing the Front Seat on a Peugeot 308
Removing the Front Seat on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video tutorial, we will see how to remove the driver's front seat from a second-generation Peugeot 308. First, open the front door and obtain…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos