Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Removal of rear light on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Tail light
Operation: Removal of rear light on Peugeot 207

Open the trunk and observe the area inside the trunk and behind the affected light. You will notice a screw clip: this is the stop that must be unscrewed and removed to free the taillight. At this point you can extract the headlight from its seat: do it and disconnect the connectors. Now whether you want to replace just one bulb or the whole headlight, it will still be child's play. If you want to replace a single bulb, access from the rear by opening the casing, remove the exhausted bulb and mount the new one, then reassemble the headlight and mount it in place. As you can see it is a very simple job.


Posted on 27 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos