Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Peugeot 207 SW

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Tail light bulb

In the following guide aimed at all of you who own a Peugeot 207 SW, we will discover the steps you need to take in order to replace the rear headlight bulb correctly. First of all, lift the rear hood and remove the protective cover located on the side of the trunk. At this point, disconnect the electrical pin and unscrew the cap. Next, go back outside and remove the entire headlight. Finally, all you have to do is replace the faulty bulb with the new one and reassemble everything correctly.

Posted on 23 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear turn signal bulb of the Peugeot 207
How to replace the rear turn signal bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today we will see the necessary instructions to disassemble and replace the turn signal bulb of the rear headlight of the Peugeot 207. First of all, …
How to Replace the Rear Light Bulb of a Peugeot 207
How to Replace the Rear Light Bulb of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the rear light bulb of a Peugeot 207 is a task you can do independently by following a few simple steps. First, open the boot. Second, remo…
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos