Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Starter Motor on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Starter motor

In today's video tutorial, you will see the main instructions that will allow you to remove and replace the starter motor on a petrol Peugeot 206, as well as on the 106, 207, Citroen C3, and Saxo. First, open the bonnet of your car and start by removing the battery, disconnecting the two terminals; then lift the vehicle and unscrew the fastening screws of the starter motor, disconnecting its electrical connector: try to find the best position to access it. Then replace it with the new one, following the video until the end!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) In order to replace the starter motor of the Peugeot 206, you need to access the bottom of the engine compartment, in the lower right part compared t…
Peugeot 206 (1998-2012 / MK 1) To replace the starter motor on a Peugeot 206, open the bonnet to access the components inside the engine bay. Disconnect the battery terminals and r…
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial, you will see how to remove and replace the starter motor on the Peugeot 206 1.9 HDI. First, open the bonnet and begin by r…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the starter motor located on the Peugeot 206? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos