Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Starter Motor from the Peugeot 206 1.9 HDI

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Starter motor

In today's video tutorial, you will see how to remove and replace the starter motor on the Peugeot 206 1.9 HDI. First, open the bonnet and begin by removing the intake hose from the air filter box by unscrewing the clamp screws; then unscrew the bolts of the starter motor located at the bottom using a ratchet spanner. At this point, disconnect the electrical wiring to remove the faulty starter motor; then install the new starter motor by following the reverse procedure!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) To replace the starter motor on a Peugeot 206, open the bonnet to access the engine bay: the part is located between the engine block and the battery…
Peugeot 206 (1998-2012 / MK 1) In order to replace the starter motor of the Peugeot 206, you need to access the bottom of the engine compartment, in the lower right part compared t…
Peugeot 206 (1998-2012 / MK 1) Today's instructions will show you how to remove and replace the diesel filter on a Peugeot 206 2.0 HDI in simple steps. First, open the bonnet of th…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the starter motor located on the Peugeot 206? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos