Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

Video tutorial

Today's instructions will show you how to remove and replace the diesel filter on a Peugeot 206 2.0 HDI in simple steps. First, open the bonnet of the vehicle and start by removing the plastic engine cover.

Then disconnect the diesel filter pipes (inlet and outlet), allowing any excess fuel to drain, as shown in the video. At this point, disconnect the electrical connector and unscrew the diesel filter to remove and replace the cartridge with a new one; finally, reconnect everything and reassemble!


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from the Peugeot 206 1.9 HDI
How to Remove the Starter Motor from the Peugeot 206 1.9 HDI
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial, you will see how to remove and replace the starter motor on the Peugeot 206 1.9 HDI. First, open the bonnet and begin by r…
How to Replace the Timing Belt on a Peugeot 206 1.4 HDi?
How to Replace the Timing Belt on a Peugeot 206 1.4 HDi?
Peugeot 206 (1998-2012 / MK 1) To replace the timing belt on a Peugeot 206 1.4 HDi, loosen the bolts securing the front right wheel to detach the rivets holding the inner cover of …
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) Next, we will discover the steps that will allow you to disassemble and replace the timing belt on the Peugeot 206 1.4 HDi. First, lift the vehicle a…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos