Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Air filter

To replace the air filter on a Peugeot 206, open the bonnet and locate the air filter box in the engine compartment, connected to the intake duct. Unscrew the screws or unclip the fasteners holding the cover of the box closed. Lift the cover and remove the used air filter from its housing. Clean the inside of the box of any dust or dirt residues. Insert the new filter into the same housing, ensuring it is positioned correctly. Refit the cover of the filter box and secure it again with the screws or fasteners removed earlier. Close the vehicle's bonnet after verifying that everything is properly fitted.

Posted on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Peugeot 206
How to Replace the Air Filter on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the air filter on a Peugeot 206 model 1 involves simple and quick steps. To replace the air filter, you need to: - open the front bonnet of…
Removing the Engine Air Filter on a Peugeot 206
Removing the Engine Air Filter on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Learn how to change the engine air filter on a Peugeot 206 from inside the engine bay (front compartment). Open the car door, pull up the engine bay …
How to Replace the Air Filter of a Peugeot 206
How to Replace the Air Filter of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the engine air filter on a Peugeot 206? In this video guide, learn how to proceed. Open the car door, pull up the engine compartme…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos