Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor in the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Starter motor

To replace the starter motor in the Peugeot 206, lift the car with a ramp to access the underside of the engine bay and loosen the screws securing the starter motor from below. Next, open the bonnet and access the right side of the engine block, where you can loosen the other screws securing the starter and disconnect the corresponding connectors. Once the old starter motor is freed, you can remove it from its housing and replace it with a new part.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the starter motor of the Peugeot 206?
How do you replace the starter motor of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the starter motor of the Peugeot 206, you need to access the bottom of the engine compartment, in the lower right part compared t…
How to Replace the Starter Motor on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the starter motor on a Peugeot 206, open the bonnet to access the components inside the engine bay. Disconnect the battery terminals and r…
How to Remove the Starter Motor from the Peugeot 206 1.9 HDI
How to Remove the Starter Motor from the Peugeot 206 1.9 HDI
Peugeot 206 (1998-2012 / MK 1) In today's video tutorial, you will see how to remove and replace the starter motor on the Peugeot 206 1.9 HDI. First, open the bonnet and begin by r…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the starter motor located on the Peugeot 206? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos