Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Changing the engine oil on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Engine oil
Operation: Changing the engine oil on Peugeot 207

Raise the hood and secure it, then unscrew and remove the engine oil top cap, promoting air circulation in the compartment. Raise the vehicle and secure it too. Unscrew the 10 mm bolts securing the protection under the engine compartment, then remove it. Place a container under the oil pan and unscrew the 22 mm drain bolt, collecting the oil in this container (properly dispose of it at the ecological islands). Once this is done, measure the quantity of oil poured and load the 5w-30 lubricant from the upper hole.


Posted on 7 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How much oil should be put in the Peugeot 207? Read Answer
    • 207 2006-2015 - What is the right amount of engine oil for the Peugeot 207 1.4 petrol engine? Read Answer
    • 207 2006-2015 - What is the quantity of oil required for a gearbox on the Peugeot 207 1 4 petrol engine? Read Answer
    • 207 2006-2015 - Where is the oil pressure bulb located in the Peugeot 207? Read Answer
    • 207 2006-2015 - How much engine oil does the Peugeot 207 1.6 HDI contain? Read Answer
    • 207 2006-2015 - What is the quantity of oil to put in the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos