Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

To replace the engine oil and filter on a Peugeot 207, start the engine for a few minutes to make the oil more fluid, then turn off the vehicle and lift it safely. Position a container under the oil sump and unscrew the drain plug to let the used lubricant drain completely.

Once the draining is complete, locate the oil filter on the engine and remove it with an appropriate spanner, being careful of any residual oil. Before installing the new filter, lubricate the seal with a bit of clean oil and screw it on until tight without forcing.

Re-screw the sump plug, lower the vehicle, and pour in the new oil from the top filler neck, respecting the specified quantity.

Start the engine for a few seconds, check for any leaks, and verify the oil level with the dipstick, topping up if necessary.


Posted on 15 May 2026 by ScegliAuto


Related tutorials

How to change the engine oil and filter in a Peugeot 207
How to change the engine oil and filter in a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To change the engine oil and filter in a Peugeot 207, let the engine run for a few minutes to slightly warm the lubricant and facilitate draining. Th…
How to Replace the Oil Filter on a Peugeot 207
How to Replace the Oil Filter on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the oil filter on a Peugeot 207? It's an easy task, let's see how to do it. Open the car's door and pull up the engine compartment release …
How to Service the Peugeot 207
How to Service the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In today's video, learn how to perform the basic service on the Peugeot 207, specifically the engine oil and filter replacement. First, proceed only …

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos