Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Oil filter

Replacing the oil filter on a Peugeot 207? It's an easy task, let's see how to do it. Open the car's door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet. Secure it in place. Unscrew the large securing bolt of the container cap where the oil filter is located (next to the engine cover panel). Remove the worn oil filter and fit a new one of the same type and size. Lift the car on a jack and unscrew the bolt of the oil sump, allowing the fluid to drain into a container (if you want to change the engine oil).

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Peugeot 207
How to reset the oil light on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) If you have just changed the engine oil and the related filter on your Peugeot 207, but the warning light continues to stay on the instrument panel, …
How to Replace the Diesel Filter on a Peugeot 207
How to Replace the Diesel Filter on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you begin, open the bonnet of your Peugeot 207. The diesel filter is located near the left side of the air filter. Start by disconnecting the …
How to change the engine oil and filter in a Peugeot 207
How to change the engine oil and filter in a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To change the engine oil and filter in a Peugeot 207, let the engine run for a few minutes to slightly warm the lubricant and facilitate draining. Th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos