Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

In today's video, learn how to perform the basic service on the Peugeot 207, specifically the engine oil and filter replacement. First, proceed only when the engine is cold. After this recommendation, you can start the work. Lift the vehicle on the ramp. Place a collection tray and then allow the used oil to drain completely. Then, close the plug. Lower the vehicle. Open the bonnet and proceed to replace the oil filter. Reinsert the correct amount of engine oil and finish the job.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn Off Maintenance on Peugeot 207
How to Turn Off Maintenance on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you turn off the service maintenance on a Peugeot 207? Follow these steps to reset the service. Enter the vehicle. Press the button located ab…
Replacing Front Brake Pads on Peugeot 207
Replacing Front Brake Pads on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to replace the front brake pads on a Peugeot 207. First, lift the vehicle and remove the front wheel by un…
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Peugeot 207 (2006-2015 / MK 1) Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos