Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Cabin air filter

To replace the cabin air filter in a Peugeot 3008, first remove the lower panel in the glove compartment on the passenger side by taking out the two plastic rivets, and the side panel of the tunnel by removing the single Torx screw. Next, remove the bottom of the compartment by unscrewing the lower screw and the two internal screws, all three being Torx type. As shown in the video tutorial, pull and remove the air duct that covers the filter cover. Finally, once the cover is open, you can proceed to replace the filter and reassemble the removed parts.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Diesel Filter in a Peugeot 3008
How to Remove and Replace the Diesel Filter in a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) This video shows how to remove and replace the diesel filter, air filter, and oil filter in a Peugeot 3008. Specifically, we will see the procedure f…
How to replace the cabin air filter of the Peugeot 3008
How to replace the cabin air filter of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In the following guide dedicated to all of you who own a 2016 Peugeot 3008, we will help you complete the replacement of the cabin air filter. Before…
How to Replace the Cabin Air Filter in a Peugeot 3008
How to Replace the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) .. How to replace the cabin air filter in a Peugeot 3008? Start by removing the cover located on the right.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos