Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to reset the Peugeot 2008 service light

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: -board computer
Operation: How to reset the Peugeot 2008 service light

If you are wondering how to manually reset the service light on your Peugeot 2008 of 2016 do not worry because in the following mini guide you will find all the information you need. The first thing to do is to make sure the car is completely off. Then locate and press the "000" button and at the same time start the car's instrument panel. Continue to hold down the "000" button until the 10 second countdown ends and, finally, turn off the panel to complete the entire reset procedure. If you make a mistake, you can easily start over.


Posted on 11 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to reset the tire pressure warning light on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the Peugeot 2008 touch screen does not turn on? Read Answer
    • Peugeot 2008 2019-2026 - How to turn off the Service warning light on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the Peugeot 2008 screen does not work? Read Answer
    • Peugeot 2008 2019-2026 - What is the problem that Peugeot 2008 has with AdBlue? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the touch screen does not work on Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos