Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Indicator Bulbs on the Peugeot 207 Mirror

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Side marker bulb

In this guide, discover how to remove and replace the indicator bulbs found on the outer mirror of the Peugeot 207. First, obtain a very thin plastic lever to pry on the small light cover of the side indicator to unclip it from the mirror; then disconnect the electrical connector of the bulb by opening the cover to access it, as shown in the video. At this point, replace the bulb with a new one, or the entire bulb holder (as shown in the video); then reassemble everything!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …
Replacing the Front Headlamp Bulbs on a Peugeot 207
Replacing the Front Headlamp Bulbs on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the front headlamp bulbs on a Peugeot 207. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secu…
Replacing the Rear Lights on a Peugeot 207
Replacing the Rear Lights on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the bulbs in the rear light of a Peugeot 207. First, open the boot and remove the pl…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos