Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Peugeot 807?

Model: Peugeot 807 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

Video tutorial

As seen in this tutorial, removing the door panel on a Peugeot 807 is a very simple and quick operation. Start by prising out the cap located inside the small glove compartment, then unscrew the Torx screw inside and proceed with all the indicated screws.

Next, unclip the lower reflector, remove the last screw, and begin to separate the panel from the door by gripping it around halfway up. Finally, disconnect both the window lift connector and the lock cable, and fit the replacement by following the reverse procedure.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Outer Handle on a Peugeot 807?
How to Replace the Outer Handle on a Peugeot 807?
Peugeot 807 (2002-2014 / MK 1) To replace the outer handle on a Peugeot 807, loosen the screws that secure the corresponding door panel. The screws are located under the plastic co…
Where to Find the OBD Port of the Peugeot 807
Where to Find the OBD Port of the Peugeot 807
Peugeot 807 (2002-2014 / MK 1) Locating the OBD port inside your Peugeot 807 is very simple, and with the instructions in this guide, you will do it without any difficulty. First, …
Where to Find and How to Access the Cooling Fan Fuse of a Peugeot 807?
Where to Find and How to Access the Cooling Fan Fuse of a Peugeot 807?
Peugeot 807 (2002-2014 / MK 1) The cooling fan fuse of your Peugeot 807 is located inside the fuse box. The fuse box is situated within the glove compartment. To reach it, start by…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos