Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the cabin filter in the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Cabin air filter
Operation: How to replace the cabin filter in the Peugeot 2008?

Replacing the cabin filter of the Peugeot 2008 is a very simple and fast operation, let's see how to proceed in this tutorial. Let's start by positioning ourselves on the passenger seat, then go under the dashboard and, with a flat-tipped screwdriver, remove the two plastic rivets indicated. We then move the carpet, remove the side panel and identify the long rectangular door. To open the latter we will have to unscrew the relative fixing screw. Finally, we insert the spare part taking care to respect its direction, usually marked along its edge.


Posted on 3 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the cabin air filter located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the pollen filter located on Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos