Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter in a Peugeot 2008 2024

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Cabin air filter

To quickly and safely replace the air filter located in the cabin of your Peugeot 2008 second series (2024 model year), follow the procedure described in this guide. First, ensure you purchase a new filter that is fully compatible with your vehicle, then take your seat in the driver's position and ensure your Peugeot 2008 is turned off. At this point, remove the plastic panel located on the left side of the lower dashboard area and then proceed to replace the old filter with the new one.

Posted on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Peugeot 2008.
How to replace the cabin air filter of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Replacing the cabin air filter in your second-generation Peugeot 2008 is not difficult. If you want to carry out the operation safely and correctly, …
How to Replace the Cabin Pollen Filter
How to Replace the Cabin Pollen Filter
Peugeot 2008 (2013-2019 / MK 1) First, locate the position of the cabin pollen filter, which in this case is found between the engine compartment and the windscreen, on the passenge…
How to Change the Cabin Air Filter on a Peugeot 2008
How to Change the Cabin Air Filter on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To complete the replacement of the cabin air filter on your first generation Peugeot 2008, simply follow the steps described in this guide. Before yo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos