Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the remote control battery of the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key
Operation: How to replace the remote control battery of the Peugeot 206?

Replacing the battery of the Peugeot 206 remote control, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will need a small screwdriver with a flat tip, another with a cross tip and a spare CR2032 type battery. First of all, identify the screw located in the lower area of the remote control, near the metal key, then unscrew it and, levering along the perimeter, separate the two halves. We then remove the internal module, extract the old battery from the housing and insert the spare one, obviously in the right direction.


Posted on 23 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - How much does it cost to have a Peugeot 206 key replaced? Read Answer
    • 206 1998-2012 - How to program the remote control of the Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos