Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 5008
  6. : Replacement of the gear knob of the Peugeot 5008

Peugeot 5008 - Video tutorial

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Gear Shift Knob
Operation: Replacement of the gear knob of the Peugeot 5008

Today's guide will show us the instructions that will allow us to disassemble and replace the Peugeot 5008 gear knob. First we get on board the car and start pulling our knob forcefully upwards, thus detaching it from the shifter and lever, as shown in the video. At this point let's also remove the support, replacing if necessary also the gear gaiter (detaching it from the base); first install the gear gaiter and then fix the knob on the lever, trying to avoid any play between it and the gear lever.


Posted on 3 June 2023 by ScegliAuto



How to remove the gearshift trim on Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Is the central tunnel lining in our Peugeot 5008 damaged? Do we want to replace it? Let's see how to proceed. We unhook the frame of the headset from
How to reset the service indicator of the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) To carry out the manual reset of the service light on your second series Peugeot 5008, you must follow the procedure described in this new guide dedi
How to reach the passenger compartment fuse box of a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Before we can begin, we will have to go and open the front door of the driver of our Peugeot 5008. The fuse box of the passenger compartment is locat

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos