Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 406

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Service warning light

Video tutorial

To manually reset the service light that illuminates on the instrument cluster of your Peugeot 406 (1995-2005), it takes just over ten seconds. First, enter the cabin and ensure the ignition is completely off. Next, press and hold the small button located in the lower right area of the cluster and turn the ignition on. Wait for the short countdown to finish, then turn off the ignition.

The service light reset is now successfully completed.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

When and How to Replace the Timing Belt on a Peugeot 406 V6
When and How to Replace the Timing Belt on a Peugeot 406 V6
Peugeot 406 (1995-2005 / MK 1) In this guide, discover how and when to replace the timing belt on a Peugeot 406 with a V6 Diesel engine. The timing belt for this type of engine sho…
How to Reset the Service Light on a Peugeot 406
How to Reset the Service Light on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today, we will discover the steps and instructions that allow us to reset the service light for regular maintenance on the Peugeot 406. First, get in…
How to Reset the Service Light on the Peugeot 406
How to Reset the Service Light on the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Discover the guide and information that will allow you to reset the service warning on the Peugeot 406 in simple steps. First, get in the vehicle and…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos