Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the Peugeot 406

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Instrument cluster

Today's guide will show you the steps to remove and replace the instrument cluster of the Peugeot 406. First, get inside the vehicle and start unscrewing the fixing screws located on the side of the cluster; remove it from the dashboard by disconnecting the electrical connectors found on the back, as illustrated in the video. At this point, the video demonstrates how to repair or replace the components of the instrument cluster; all that remains is to refit it and check its operation, following the video tutorial to the end!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 406
How to Reset the Service Light on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) To manually reset the service light that illuminates on the instrument cluster of your Peugeot 406 (1995-2005), it takes just over ten seconds. First…
Removing the Dashboard of a Peugeot 406
Removing the Dashboard of a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Insert the stereo release keys into the sides of the stereo and lever it out. Remove the stereo and disconnect the various wiring (disconnect the pow…
How to Reset the Trip Odometer in a Peugeot 406?
How to Reset the Trip Odometer in a Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will learn how to reset the trip odometer in a Peugeot 406, a very simple and quick operation. This odometer can be quite usefu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos