Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 406
  6. : Disassembly of the instrument cluster on Peugeot 406

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Instrument cluster
Operation: Disassembly of the instrument cluster on Peugeot 406

Get on the driver's seat and start disassembling the speedometer by unscrewing the three screws located at the top. Now unscrew the two screws located under the steering wheel, as shown in the video. Lower it and open the protective plastic, removing the upper part. Remove the air vents by simply pulling them by hand, then also remove the frames using a plastic wedge or a small flat screwdriver. Use the same tool you chose to pry in the gap between the instrument panel and the top cover. Pull out the panel and disconnect its connectors.


Posted on 2 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos