Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Wing Mirror on a Peugeot 406

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Side mirror

Video tutorial

Remove the wing mirror on a Peugeot 406. Start by removing the plastic cover, then unscrew the securing screws of the mirror with a screwdriver (located above the door). Disconnect the power connector for the mirror.

Remove the mirror with the power cables from the car door. Fit the mirror with the power cables and the securing pins onto the plastic that is fixed to the door panel.

Reattach the plastic cover over the door. Finally, test the correct operation of the mirror.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi
Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi
Peugeot 406 (1995-2005 / MK 1) Today, we will outline the main steps for dismantling and replacing the clutch on the Peugeot 406 2.0 HDi. First, open the bonnet and begin by removi…
Guide to Removing the High-Pressure Fuel Pump of the Peugeot 406 2.2 HDI
Guide to Removing the High-Pressure Fuel Pump of the Peugeot 406 2.2 HDI
Peugeot 406 (1995-2005 / MK 1) Below are the main instructions for removing and replacing the high-pressure fuel pump of the Peugeot 406 2.2 HDI. First, open the engine bonnet of t…
Removing the Dashboard of a Peugeot 406
Removing the Dashboard of a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Insert the stereo release keys into the sides of the stereo and lever it out. Remove the stereo and disconnect the various wiring (disconnect the pow…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos