Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Clutch

Today, we will outline the main steps for dismantling and replacing the clutch on the Peugeot 406 2.0 HDi. First, open the bonnet and begin by removing the air filter box, loosening the screw of the intake hose clamp; then disconnect the clutch cable located underneath. Next, raise the vehicle and remove the front left wheel, subsequently disconnecting the front driveshaft from the gearbox. Proceed to remove the clutch cover, replacing the clutch and, if necessary, the flywheel, following the video tutorial until the end.

Posted on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 406 (1995-2005 / MK 1) Below we will see the main instructions useful for disassembling and replacing the high pressure fuel pump of the Peugeot 406 2.2 HDI. First of all, …
Peugeot 406 (1995-2005 / MK 1) In this guide, learn how to remove and replace the injectors on a Peugeot 1.6 HDi, as well as on other models from the manufacturer with the same eng…
Peugeot 406 (1995-2005 / MK 1) To replace the clutch on a Peugeot 406, you need to loosen the screws that secure the gearbox to its housing: these screws are located at the bottom …

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos