Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Injectors from a Peugeot 406 1.6 HDi

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Fuel injectors

In this guide, learn how to remove and replace the injectors on a Peugeot 1.6 HDi, as well as on other models from the manufacturer with the same engine. First, open the engine bonnet of your car and remove the air intake hose by disconnecting the turbo pipes; then remove the upper plastic cover by unscrewing the screws, and disconnect the electrical connectors of the four injectors. At this point, use a socket wrench to remove the injectors; then replace them with new ones, screwing them in by hand first and then tightening!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the high-pressure fuel pump of the Peugeot 406 2.2 HDI
Guide to disassembling the high-pressure fuel pump of the Peugeot 406 2.2 HDI
Peugeot 406 (1995-2005 / MK 1) Below we will see the main instructions useful for disassembling and replacing the high pressure fuel pump of the Peugeot 406 2.2 HDI. First of all, …
Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi
Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi
Peugeot 406 (1995-2005 / MK 1) Today, we will outline the main steps for dismantling and replacing the clutch on the Peugeot 406 2.0 HDi. First, open the bonnet and begin by removi…
Removing the Door Trim on a Peugeot 406
Removing the Door Trim on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Want to remove the door panel? Here’s how to take off the cover panel of a Peugeot 406. To remove the cover panel, you need to take off some plastic …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos