Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the high-pressure fuel pump of the Peugeot 406 2.2 HDI

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Pump

Below we will see the main instructions useful for disassembling and replacing the high pressure fuel pump of the Peugeot 406 2.2 HDI. First of all, we open the hood of the car and start disassembling and removing the engine support; we lift the car and remove the right front wheel, removing the fender and the V-belt, as shown in the video. At this point, we remove the distribution cover and disconnect the water pump pipe; we remove the timing belt and then the high pressure diesel pump, following the video tutorial until the end!

Posted on 13 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi
Guide to Replacing the Clutch on a Peugeot 406 2.0 HDi
Peugeot 406 (1995-2005 / MK 1) Today, we will outline the main steps for dismantling and replacing the clutch on the Peugeot 406 2.0 HDi. First, open the bonnet and begin by removi…
How to Remove and Replace the Fuel Pump on the Peugeot 406
How to Remove and Replace the Fuel Pump on the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In this video tutorial, you will learn how to remove and replace the fuel pump or float pump on the Peugeot 406 first series, following these simple …
How to Remove the Fuel Pump from the Peugeot 406?
How to Remove the Fuel Pump from the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will see how to remove the fuel pump from the Peugeot 406, a task necessary if you need to replace the float or the pump itself…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos