Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Fuel Pump on the Peugeot 406

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Fuel pump

In this video tutorial, you will learn how to remove and replace the fuel pump or float pump on the Peugeot 406 first series, following these simple steps. First, lift and remove the rear bench seat of your car; then remove the fuel pump cover to access it. At this point, disconnect the electrical connector of the float and disconnect the fuel hoses, as shown in the video; all that’s left is to unscrew the pump collar to remove it, replacing it with the new one, following the video to the end!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from the Peugeot 406?
How to Remove the Fuel Pump from the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will see how to remove the fuel pump from the Peugeot 406, a task necessary if you need to replace the float or the pump itself…
Guide to disassembling the high-pressure fuel pump of the Peugeot 406 2.2 HDI
Guide to disassembling the high-pressure fuel pump of the Peugeot 406 2.2 HDI
Peugeot 406 (1995-2005 / MK 1) Below we will see the main instructions useful for disassembling and replacing the high pressure fuel pump of the Peugeot 406 2.2 HDI. First of all, …
How to Reset the Trip Odometer in a Peugeot 406?
How to Reset the Trip Odometer in a Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will learn how to reset the trip odometer in a Peugeot 406, a very simple and quick operation. This odometer can be quite usefu…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos