Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : How to disassemble and repair the dashboard display of the Peugeot 406.

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Operation: How to disassemble and repair the dashboard display of the Peugeot 406.

In this video tutorial, we will see how to disassemble and repair the central display of the dashboard of the Peugeot 406, following these simple steps. First, we get into the cabin and start by removing the side caps of the display; then we unscrew the screws underneath, disconnecting the electrical connector to permanently remove the display, as shown in the video. At this point, we carry out the repair of the display or the electronic board, replacing the display if necessary, following the video tutorial until the repair and subsequent installation.


Posted on 1 September 2023 by ScegliAuto

    Frequently Asked Questions

    • 406 1995-2005 - What to do when the Peugeot 406 fan doesn't work? Read Answer
    • 406 1995-2005 - Where is the Peugeot 406 HDI fan fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos