Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and repair the cabin fan of the Peugeot 406

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Blower motor

Video tutorial

The following steps will guide you through removing, replacing, or repairing the cabin fan motor of the Peugeot 406. First, locate the cabin fan, which is found low on the passenger side (under the glove compartment); remove the plastic cover and unscrew the fan mounting screws to take it out, disconnecting its power connector.

At this point, repair or replace the cabin fan, reconnect the electrical supply, and check the operation of the air conditioning; then reassemble everything!


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Dismantle and Repair the Dashboard Display of the Peugeot 406
How to Dismantle and Repair the Dashboard Display of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In this video tutorial, you will learn how to dismantle and repair the central display of the Peugeot 406 dashboard by following these simple steps. …
How to Replace the Radiator Fan on a Peugeot 406?
How to Replace the Radiator Fan on a Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will see how to replace the radiator fan on a Peugeot 406, a very simple and quick operation. First, ensure the key is not in t…
Where to Find the Fuses on a Peugeot 406
Where to Find the Fuses on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) On the Peugeot 406, all fuses are divided within the designated fuse boxes installed in the vehicle: this type of vehicle will have two boxes that co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos