Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fan on a Peugeot 406?

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

Video tutorial

In this tutorial, you will see how to replace the radiator fan on a Peugeot 406, a very simple and quick operation. First, ensure the key is not in the ignition, then open the bonnet, remove the indicated plastic rivets, and take off the grille.

Next, undo the two side bolts, remove the upper bracket, and unscrew the three bolts securing the faulty fan. At this point, you can separate the fan from the radiator frame, disconnect the power connector, and proceed with fitting the replacement by following the reverse procedure.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to remove and repair the cabin fan of the Peugeot 406
How to remove and repair the cabin fan of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) The following steps will guide you through removing, replacing, or repairing the cabin fan motor of the Peugeot 406. First, locate the cabin fan, whi…
Where to Find the Fuses on a Peugeot 406
Where to Find the Fuses on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) On the Peugeot 406, all fuses are divided within the designated fuse boxes installed in the vehicle: this type of vehicle will have two boxes that co…
How to Replace the Front Headlamp Bulb on the Peugeot 406
How to Replace the Front Headlamp Bulb on the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Replacing the front headlamp bulb on your Peugeot 406 is undoubtedly one of the simplest maintenance tasks, and with the following guide, you can com…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos