Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Remote Key Cover

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Key

This video is currently unavailable

The failure of the buttons on the remote key cover is a common fault on many car models: in this regard, it is easy to find a new complete cover online, including a blank key to be cut, but you can also simply replace just the shell with the buttons or transfer the key blade to the new shell; start by opening the original key shells by prying at the designated rear slot, extract the electronic circuit and the transponder; detach the key blade from the original shell and remove the pin to eliminate the plastic reinforcement; then remove the blank blade from the new shells by unscrewing the relevant fastening screw, insert the transponder and electronic circuit, close the new covers, and heat the end of the original key to insert it into the new shell.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Repairing the Multifunction Display
Repairing the Multifunction Display
Peugeot 406 (1995-2005 / MK 1) The following video shows how to repair the multifunction display (MFD) of a Peugeot 406. It has malfunctioning lines on the screen. First, remove th…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Peugeot 406 (1995-2005 / MK 1) The cabin air filter housing for this car model is located externally, just below the windscreen, on the passenger side; therefore, open the front bo…
How to Replace the Pollen Filter on a Peugeot 406
How to Replace the Pollen Filter on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In this video tutorial, you can see how to replace the pollen filter on a Peugeot 406 by following a few simple steps that will guide you towards pro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos