Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Peugeot 406

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Headlight bulb

Replacing the headlight bulb of your Peugeot 406 is undoubtedly one of the simplest maintenance operations, and thanks to the following guide you will be able to complete it without any difficulty even if you are not very familiar with this type of operation. First of all, make sure that your Peugeot 406 is turned off, then lift the front hood and remove the protective cap located at the back of the headlight. Once removed, proceed to replace the non-functioning bulb with a new one. Finally, reattach the protective cap and you are done.

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front bumper of the Peugeot 406
Disassembly of the front bumper of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today's steps will show us how to disassemble and replace the front bumper of the Peugeot 406, following the instructions below. First, we open the h…
How to remove the front bumper of the Peugeot 406
How to remove the front bumper of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today we will discover the steps that will allow us to disassemble the front bumper of the Peugeot 406, following the instructions below. First, we o…
How to disassemble the front door panel of the Peugeot 406
How to disassemble the front door panel of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In a few simple steps, we will see how to disassemble and remove the front door panel of the Peugeot 406, in simple steps. First, open the front door…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos