Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate Eco Mode on the Peugeot 406?

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

Video tutorial

To deactivate Eco Mode on the Peugeot 406, there is no procedure that can be done from the central dashboard display: to disable this mode, open the bonnet to access the engine compartment. Here, open the fuse box located next to the battery, near the left front headlamp.

Once the box is open, disconnect the connector at the top of the box and leave it disconnected for a few minutes. Reconnecting it after this interval will ensure that the ECO mode is completely disabled.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to disable the audio signal of the radio on a Peugeot 406?
How to disable the audio signal of the radio on a Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) To disable the audio signal of the radio on a Peugeot 406, you need to remove the device completely from its housing. Once the radio is extracted, co…
How to Replace the Wiper Blades on the Peugeot 406
How to Replace the Wiper Blades on the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) To replace the wiper blades on the Peugeot 406, lift the arm so that the blade is not in contact with the windscreen. This will allow you to grasp th…
How to Replace the Clutch on a Peugeot 406?
How to Replace the Clutch on a Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) To replace the clutch on a Peugeot 406, loosen the screws securing the gearbox to its housing. These screws will be located at the bottom of the engi…

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos