Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Programming the Key for the Peugeot 206 Plus

Model: Peugeot 206 Plus MK 1 - Years 1998-2014
Part: Key

Here is the necessary guide on how to program the remote key for the Peugeot 206 and 206 Plus. First, get inside the vehicle and connect your computer, equipped with the appropriate software for key programming; then turn on the ignition to allow communication between the ECU and the computer. At this point, follow the indicated procedure to associate the key and the remote; once the key is memorised, verify its operation by following the video tutorial to the end!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 206 Plus
How to replace the front headlight bulb of the Peugeot 206 Plus
Peugeot 206 Plus (1998-2014 / MK 1) Today we proceed with the replacement of the front headlight bulb of the Peugeot 206 plus. To perform the replacement of the bulb, we must remove the…
How are the Fuses Arranged in the Peugeot 206 Plus?
How are the Fuses Arranged in the Peugeot 206 Plus?
Peugeot 206 Plus (1998-2014 / MK 1) The Peugeot 206 Plus is the latest version of the Peugeot 206, before it was ultimately replaced by its successor, the 207. There are no significant …
How to Reset the Service Light on the Peugeot 206 Plus?
How to Reset the Service Light on the Peugeot 206 Plus?
Peugeot 206 Plus (1998-2014 / MK 1) In this tutorial, we will see how to reset the service light on the Peugeot 206 Plus, a very simple and quick operation, to be performed only after c…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos