Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Timing belt replacement intervals on Peugeot 307.

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Timing belt
Operation: Timing belt replacement intervals on Peugeot 307.

The timing belt is a toothed belt that transmits the movement of the crankshaft to the camshaft, which is the component that regulates the movement of the pistons and valves. In some cases, the timing belt also regulates the operation of the water pump, which serves to cool the engine. It is therefore essential that it is in good condition to allow the correct functioning of the vehicle and, if not, the timing belt must be replaced. On this model of car, it is recommended to replace the timing belt between 120,000 km and 180,000 km.


Posted on 9 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 307 2001-2009 - How many km do you have to change the timing belt of the Peugeot 307 hdi? Read Answer
    • 307 2001-2009 - After how many years should the Peugeot 307 timing belt be replaced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos