Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Interval on the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Warning light – error code

In today's video, you will learn how to reset the service interval parameter on the Peugeot 307. First, ensure you perform the recommended routine maintenance as stated in the vehicle's manual. Once done, locate the button on the instrument panel. Press and hold it while turning the ignition key. After a few seconds, a countdown of 10 seconds will begin. At the end of this countdown, the requested operation will be completed, and the parameter will be reset to the manufacturer's settings.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Peugeot 307
How to reset the service light on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To reset the service light related to the car service on the Peugeot 307, we first need to get into the vehicle and then press the TRIP A button loca…
How to Reset the Oil Service in a Peugeot 307?
How to Reset the Oil Service in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Resetting the oil service in a Peugeot 307 is very simple. Follow these steps in this tutorial. This procedure should only be followed after completi…
How to Reset the Service Light on a Peugeot 307?
How to Reset the Service Light on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) On the Peugeot 307, to reset the Service light, press and hold the button located on the right side of the display, next to the speedometer. While ho…

    Frequently Asked Questions

    • 307 2001-2009 - If the fuel warning light on my Peugeot 307 no longer works, where do I find the fuse box? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos