Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlining in a Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Checks and maintenance

In this tutorial, you will see how to remove the headlining in a Peugeot 307, a very simple and quick operation. First, open the side caps of the grab handles and undo the fixing screws with a Torx T30 screwdriver. Next, extend the two sun visors, detach them, and using a Torx T20 screwdriver, remove the two screws. Continue by removing the various upper seals of the doors and the panoramic glass, disassemble the interior light, and detach the side panels of the boot. At this point, you can remove the headlining from the roof, position the replacement, and reassemble everything.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlining of a Peugeot 307
How to Remove the Headlining of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's briefly go through the instructions necessary to remove and replace the headlining or interior roof lining of a Peugeot 307. First, get inside …
How to Replace the Interior Dome Light Bulbs on Peugeot 307
How to Replace the Interior Dome Light Bulbs on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will see how to disassemble and replace the interior lights of the dome light on a Peugeot 307. First, get inside the car and remo…
Where to Find the OBD Port on the Peugeot 307
Where to Find the OBD Port on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this new guide, you will learn how to easily and safely locate the OBD port in your Peugeot 307. First, enter the vehicle from the driver's side a…

    Frequently Asked Questions

    • 307 2001-2009 - Where is the oil pressure sensor located on the Peugeot 307? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos