Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Headlamp Bulb on a Peugeot 5008?

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlamp bulb on a Peugeot 5008, open the tailgate to locate the panel next to the headlamp. Remove this panel from its housing by unscrewing the fixing screw to access the additional screws underneath.

These can be loosened, allowing you to pull the headlamp out of its housing and disconnect the connector inside. Now, the corresponding bulb can be removed from its holder and replaced with a new one, inserting it back into the headlamp and securing the unit in its place.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Peugeot 5008 (2017-2024 / MK 2) Let's see the procedure for removing and replacing the front headlamp bulb on a Peugeot 5008, as well as the 3008. First, open the bonnet of the vehi…
Peugeot 5008 (2009-2016 / MK 1) Here are the steps necessary to remove and replace the front headlamp bulb on the Peugeot 5008. First, open the bonnet of your car and start by remov…
Peugeot 5008 (2009-2016 / MK 1) In this tutorial, you will learn how to remove and replace the front headlamp bulb on a Peugeot 5008 in simple and quick steps. First, open the bonne…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos