Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Enable and disable the courtesy lights of the Peugeot 2008.

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Interior lights ceiling light bulb
Operation: Enable and disable the courtesy lights of the Peugeot 2008.

I open the door in the Peugeot 2008, and for about thirty seconds, the courtesy lights on the ceiling turn on. These lights are useful, especially in the evening, to help us settle in better while driving. If necessary, there is the possibility to deactivate them. To do so, we sit in the driver's seat and place two fingers on the ceiling light, holding them for a few seconds. This will disable this function, as confirmed by the "Off" message that appears next to the icon of the car with the doors open. To return to the previous setting, we again place two fingers on the ceiling light for a few seconds, and the "Off" message will disappear, confirming the operation.


Posted on 12 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos