Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the air filter in the Peugeot 107

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

Video tutorial

To achieve optimal fuel mixture, it is important that a consistent and clean airflow reaches the fuel system of the Peugeot 107. To ensure this, you must periodically replace the specific filter. To do this, open the bonnet of the engine compartment; the filter box is located in the centre of the engine, protected by a cover that can be removed by unclipping the four metal clips.

Move the cover aside and remove the old filter element, clean the housing of any dirt, and fit a new filter ensuring the rubber edge adheres well. Refit the cover and secure it with its clips.


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) If you want to replace the engine air filter of your Peugeot 107 on your own, just pay attention to the various steps described in the following guid…
Replacing the Air Filter in a Peugeot 107
Replacing the Air Filter in a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) This guide shows how to replace the engine air filter in a Peugeot 107. Open the car door, pull up the bonnet release lever located at the bottom lef…
How to replace the cabin air filter of the Peugeot 107
How to replace the cabin air filter of the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Today we will explain the steps to replace the cabin air filter of the Peugeot 107 on your own. Turn off the car and engage the handbrake; the cabin …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos