Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: V-belt

To replace the serpentine belt on a Peugeot 3008, open the bonnet to access the components located to the left of the engine block: here you will find the belt positioned around the respective pulleys. By loosening the central nut of the tensioner pulley, you can completely remove it from its housing, thereby reducing the tension on the belt. You can now slide the old belt completely out of its seat, allowing you to fit the new one around the pulleys. Now reinstall the tensioner pulley to ensure everything functions correctly.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Peugeot 3008 1.2 Puretech
Guide to replacing the timing belt of the Peugeot 3008 1.2 Puretech
Peugeot 3008 (2016-2023 / MK 2, P84) Today we will discover the information and steps useful for disassembling and replacing the timing belt of the Peugeot 3008 1.2 Puretech. In this cas…
Replacing the Timing Belt on a Peugeot 3008
Replacing the Timing Belt on a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Today, discover the instructions that will allow you to remove and replace the timing belt on the Peugeot 3008. First, raise the vehicle and remove t…
How to change the drive belt on the Peugeot 3008/5008
How to change the drive belt on the Peugeot 3008/5008
Peugeot 3008 (2016-2023 / MK 2, P84) In this video, we see how to change the service belt on a Peugeot 3008 or 5008. The manufacturer recommends changing it at 120,000 km, but the YouTub…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos