Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Replacement of the timing belt of the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Timing belt
Operation: Replacement of the timing belt of the Peugeot 3008

Today we will discover the instructions that will allow us to dismantle and replace the timing belt of the Peugeot 3008. First of all, we lift the car and remove the right front wheel; we remove the fender and then remove the V-belt, subsequently removing the crankshaft pulley, as shown in the video. At this point, we remove the engine support and then the distribution cover; we then take the necessary references to remove the belt, installing the new original one, following the video tutorial until the end for reassembly!


Posted on 16 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2016-2023 - What are the problems with the belt of the 3008? Read Answer
    • 3008 2016-2023 - How much is the timing belt on the Peugeot 3008? Read Answer
    • 3008 2009-2016 - How many km does the Peugeot 3008 timing belt need to be replaced? Read Answer
    • 3008 2016-2023 - What are the problems with the timing belt of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What is the cost of replacing the timing belt in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - When to replace the timing belt on the Peugeot 3008 SUV ?? Read Answer
    • 3008 2009-2016 - How many km do you replace the Peugeout 3008 timing belt? Read Answer
    • 3008 2009-2016 - How many km to replace the distribution of the Peugeot 3008? Read Answer
    • 3008 2009-2016 - How many km should the timing belt be replaced on the Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos