Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Peugeot 3008 1.6 HDi

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Timing belt

To replace the timing belt on the Peugeot 3008, open the bonnet to access the side of the engine bay. Here, you will need to detach the plastic cover that conceals the pulleys and the belt itself: once these are accessible, loosen the tensioner pulley to reduce its tension, allowing for its removal. When the old belt has been removed, you can insert the new one, tightening the nut that secures the central pins of all the pulleys; finally, cover everything with the corresponding plastic cover.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Peugeot 3008 1.2 Puretech
Guide to replacing the timing belt of the Peugeot 3008 1.2 Puretech
Peugeot 3008 (2016-2023 / MK 2, P84) Today we will discover the information and steps useful for disassembling and replacing the timing belt of the Peugeot 3008 1.2 Puretech. In this cas…
When should the timing belt of the Peugeot 3008 2.0 HDi 150 be replaced?
When should the timing belt of the Peugeot 3008 2.0 HDi 150 be replaced?
Peugeot 3008 (2009-2016 / T84, MK 1) The timing belt can be defined as the most important component of a car, as its operation depends on it, and, importantly, it is essential to replace…
Replacing the Timing Belt on a Peugeot 3008
Replacing the Timing Belt on a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Today, discover the instructions that will allow you to remove and replace the timing belt on the Peugeot 3008. First, raise the vehicle and remove t…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - When to replace the timing belt on the Peugeot 3008 SUV ?? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos