Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the timing belt on the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Timing belt
Operation: How to replace the timing belt on the Peugeot 3008?

In order to replace the timing belt of the Peugeot 3008 it is necessary to loosen the screws that fix the front right wheel, so that this is completely removed giving access to the components in its rear part. After the wheel has been removed, it will be possible to detach the inner wheel arch cover and unscrew the center pins of the pulleys around which the belt is located. After the water pump has also been unscrewed, it will be possible to remove the belt and insert a new one, also fitting the pulleys again. Finally, all removed components will have to be reassembled.


Posted on 6 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - What are the problems with the belt of the 3008? Read Answer
    • 3008 2016-2023 - How much is the timing belt on the Peugeot 3008? Read Answer
    • 3008 2009-2016 - How many km does the Peugeot 3008 timing belt need to be replaced? Read Answer
    • 3008 2016-2023 - What are the problems with the timing belt of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What is the cost of replacing the timing belt in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - When to replace the timing belt on the Peugeot 3008 SUV ?? Read Answer
    • 3008 2009-2016 - How many km do you replace the Peugeout 3008 timing belt? Read Answer
    • 3008 2009-2016 - How many km to replace the distribution of the Peugeot 3008? Read Answer
    • 3008 2009-2016 - How many km should the timing belt be replaced on the Peugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos